Detailed SSC JE Analysis 22nd January 2018 & Questions Asked

0
453
SSC JE Analysis 22nd January 2018

SSC JE Analysis 22nd January 2018 – Get complete analysis on Questions asked, good attempts and difficulty level.

APPLY NOW FOR SBI CLERK RECRUITMENT CLICK HERE 

Detailed SSC JE Analysis 22nd January 2018 & Questions Asked

SSC JE Analysis 22nd January 2018: SSC JE Exam 2018 is scheduled to held from 22nd January to 29th January 2018 to recruit most eligible applicants for the post of Junior Engineers in Civil, Electrical & Mechanical department. The exam today was conducted in 3 shifts. Check the SSC JE Analysis of All Shifts for Paper – I and know about the types of questions asked from different sections, good attempts and difficulty level of the exam.

SSC JE Analysis 22nd January 2018: Notification Details

Name of the organization Staff Selection Commission
Official link ssc.nic.in
Name of the post Junior Engineer
Location All Over India
category Exam Analysis
Status Released
Examination date 22nd Jan to 29th Jan 2018

SSC JE is a great opportunity for all engineers. In this article, we have provided SSC JE Analysis 22nd January 2018 and Review of SSC JE Exam held on 22nd January 2018.

Important Dates: SSC JE Analysis 22nd January 2018

Exam Event Important Dates
Release of the Online
Application Form
21st October 2017
Last Date to Register 17th November 2017
(before 5:00 PM)
SSC JE Paper-1
Exam Date
22nd to 25th
January 2018
SSC JE Paper-2
(Descriptive)
Exam Date
29th April 2018

SSC JE Exam Pattern: SSC JE Analysis 22nd January 2018

Papers Subject No. of
Qs.
Max
Marks
Time
Paper-I
Objective Type
Computer Based
(i) General
Intelligence
& Reasoning
50 50 2 Hours
per shift
(ii) General
Awareness
50 50
(iii)
Part –A
Civil &
Structural
OR
Part-B
Electrical
OR
Part-C
Mechanical
100 100

SSC JE Analysis 22nd January 2018 – Paper I

Section No. of Questions Good Attempts Level
Technical (Civil) 100 65-70 Moderate
General Intelligence 50 38-43 Easy-Moderate
General Awareness 50 31-36 Difficult to moderate
Overall 200 129-138 Moderate

SSC JE Analysis 22nd January 2018 – General Intelligence & Reasoning

Difficulty Level :-

Easy – 35 to 40 questions
Moderate – 6 to 7 Questions
Difficult – 2 questions

 

S. No. Topics No. Of Question asked
1 Number & Alphabetical Series 12
2 Coding Decoding 6
3 Inequality 1
4 Analogy 2
5 Odd one Out 10
6 Syllogism 3
7 Statement & Conclusions 0
8 Dice 1
9 Directions Sense 3
10 Sitting Arrangement 1
11 Non-verbal: Complete the Image, Embedded Image, Paper Folding & Cutting, Mirror Image 5
12 Venn diagram 1
13 Blood relations 2
14 Matrix 1
15 Mathematical Calculations 2
Total No. Of Questions 50

SSC JE Analysis 22nd January 2018 – General Awareness

S. No. Topics No. Of Question asked
1 Science 17
2 History 7
3 Polity 6
4 Geography 5
5 Economics 6
6 Current Affairs 9
Total No. Of Questions 50
1. Which state has the highest area under forest in India?
2. How many chambers are there in human heart?
3. What conditions lead to hypermetropis?
4. Which country will host Summer Olympics?
5. Hieun tsang the Chinese traveler travelled in India during?
6. Who won Davis cup 2017?

SSC JE Analysis 22nd January 2018 – Electrical

  • Thevenin & Norton: 2 Qs
  • Voltmeter/ Ammeter: 1-2 Qs
  • Illumination: 2-3 Qs
  • Power System: 10 Qs
  • Network Theory: 15-20 Qs
  • Electrical Emission: 15-20 Qs
  • Measurements: 15-20 Qs
  • Magnetic Circuits: 3-4 Qs
  • Resonance & Frequency: 10 Qs
  • Finding Current in Different Branches: 2-3 Qs
  • Bridges: 2 Qs
  • Storage Factor: 1 Qs
  • Electronics: 10 Qs
  • Resistance Colour Coding: 1-2 Qs
  • Questions:
    1. Q. What is the Unit of Reluctance?
    2. Q. Finding the equivalent resistance?
    3. Q. What is the ideal condition for max power transfer?
    4. Q. Define Superposition Theorem?
    5. Q. Define Galvanometer?
    6. Q. What do you mean sharing bridge?

80% of the paper was theory based and 20% was numerical based.

SSC JE Analysis 22nd January 2018 – Mechanical

  • Thermo Dynamics: 10 Qs
  • Fluid and Mechanics: 20 Qs
  • Production & DME: 15 – 20 Qs
  • Strength of Material: 10 – 15 Qs
  • Topics:
    1. Supercharging
    2. Irreversibility
    3. Carnot Engines
    4. Limit & Tolerance
    5. Capillary Rise Coefficient
    6. Viscous and Non-viscous Fluids
    7. Otto, Diesel & Dual cycles
  • Questions:

Q1. Density of water is maximum at which temperature?
Q2. What happens due to excess quantity of sulfur in diesel engine?
Q3. Rotary IC engine is the inversion of ?
Q4. What happens if more carbon deposits on the piston of cylinder?
Q5. In manometer, better liquid combination is having higher viscosity or lower viscosity?
Q6. Chezy equation is used in case of?
Q7. In the PV diagram, triple point is a line or point?
Q8. What is the relation which represents Mollier diagram?
Q9. Determine the tensile stress, if the axial load is 10 KN and the dimensions are 20mmx20mm
Q10.What will be the capillary rise at 20 C in a clean glass having 1mm bore?
Q11.What is the radial distance of tooth from pitch circle to top of the tooth?
Q12.MSST was given by?
Q13.Which of the conditions represent steady uniform flow?
Q14.Which of the relations represent irreversible and impossible flow?
Q15.What is the upward force on a submerged body in a liquid called?
Q16.What will be the BMD in case of a UVL acting on a cantilever beam (zero at free end)?
Q17.At what pressure properties of water and steam become identical?
Q18.Due to friction lining wear varies as?
Q19.Which of the equation defines enthalpy
a. U + pv/E
b. U + EPV
Q20.What is the ratio of actual dimension and theoretical dimension called?
Q21.Fluid in equilibrium cant sustain which of the following?
Q22.In a blur body, what is the condition between pressure drag and friction drag?
Q23.Rankine theory represents?
Q24.Which of the following state is observed after material gets work hardened?
Q25.What is the properties of material called through which it regains its original shape?
Q27.Which of the following governor has pendulum attached to its sleeve?
Q28.What is the rate of change of moment of momentum called
Q29.What is dryness fraction ?
Q31.What is the slope called in case of Mollier diagram
Q32.Which state is obtained after the mechanical operation Austempering?
a. Martensite
Q33.Which process can be used in place of isothermal process at atmospheric process?
Q34.If the COP of the refrigerator is 5, then find the efficiency of the corresponding heat             engine?
Q35.How is the size of cam determined?
Q36.What is the pressure distribution in case of Uniform Wear Theory?
Q37.What is the stream lines if U = ax and V = by
Q38.Preheating in welding is done in which of the following matter?
Q39.Which of the following fluid offers no resistance?
Q40.What is the Mean Effective Pressure in case of Otto cycle..(some data)?
Q41.Find out the efficiency of the Otto Cycle (some data)?
Q42.Find out the angular acceleration of the flywheel (some data)?
Q43.Which among diesel engine and petrol engine is more efficient having same compression ratio and same heat added?
Q44.What is the equivalent length of the bar in case of both ends fixed?
Q45.Find out the contact ratio?

Q46.What is the relation between Claussius inequality and Kelvin statement in second law of thermodynamics?

The overall paper consisted 15% of numerical problems and 80-85% theory based. Around 10-15% questions came from Testbook’s Test Series.


SSC JE ADMIT CARD REGION WISE DOWNLOAD HERE

Best books for SSC JE Preparation

Books Download Here
A Modern Approach To Verbal & Non-Verbal Reasoning by RS Aggarwal Buy Online
Quantitative Aptitude For Competitive Examinations by RS Aggarwal Buy Online
Magical Book On Quicker Maths by M Tyra Buy Online
Fast Track Objective Arithmetic by Rajesh Verma Buy Online
Objective General English by SP Bakshi Buy Online
General English for All Competitive Examinations by SC Gupta Buy Online
Lucent’s General Knowledge by Sanjeev Kumar, Renu Sinha, Binay Karna, Manwendra Mukul, RP Suman Buy Online

NO COMMENTS

LEAVE A REPLY